Plastic to oil to electricity pyrolysis plant of 12 (TPD): 2014 – Europe

Commissioned in April 2014 is 12 TPD project in Europe. The plant and machinery was manufactured at Agile Process’ Navi Mumbai workshops in less than 4 months, installed at site in 25 days and the plant was commissioned in less than 15 days.

The feedstock used in this pant is mixed plastic scrap segregated from municipal solid waste and sourced from a local scrap dealer.

Plant produces about 7500 to 9500 lit of pyrolysis oil per day from 12MT of plastic waste. Thus the oil yield varies between 62.5% to 80% depending on the polymer content in the feedstock.

Plant operates on fully automated PLC (Programmable Logic Controller) & SCADA (Supervisory control and data acquisition) computerised system.

The oil produced in the plant is fired in the 1mw/hr electricity generator. The generator consumes 7350lit of pyrolysis oil per day.


0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *